Wall Thickness Gauge Digital – Magna-Mike 8600

Product Description

Magnamike is a high-quality product by Olympus. It is the best device to perform wall thickness gauge testing. The instrument provided a non-destructive method of testing the wall thickness of the PET bottles. Presto Stantest is an authorized dealer of the device.

Product Specification

• Ion battery
• Keypad – Japanese, English, International, Chinese
• Languages Supported – English, Spanish, French, German, Japanese, Chinese, Portuguese, Swedish, Norwegian, Dutch, Polish, Russian, Hungarian, Czech, Italian
• Data Storage – Onboard and removable 2 GB Micro SD card
• Battery life (Optional) – 12 h to 13 h (lithium-ion)
• Power requirements – AC Mains: 100 V AC to120 V AC, 200 V AC to 240 VAC
• Display type – Full VGA (640 x 480 pixels) transflective color LCD
• Display dimensions (W x H, Diag.) – 117 mm x 89 mm, 146 mm (4.62 in. x 3.49 in., 5.76 in.)
• Min/Max capture mode – Captured at 60 Hz measurement rate
• Display update rate – 4, 8, 16 and 20 Hz
• Alarm – High and Low alarms
• Resolution – 1 mm (0.01 in.), 0.01 mm (0.001 in.), 0.001 mm (0.0001 in.) (Depending on thickness range)
• Data logger – Internal file-based alphanumeric data logger
• Maximum Thickness range: Up to 25.4mm (1.00 in.)
• Minimum Thickness range: 0.001mm (0.0001 in.)

Product Features

• Measurement based on probe’s Hall Effect sensor
• Digital Display readout
• Repeatability of test measurements of test sample
• Measurements through Target Ball or wire or Disk using Magnetic field
• Expandable Thickness range up to 25.4mm (1.00 in.)
• Replaceable Wear Caps – Standard and Chisel type
• Expanded target selection – 3/16 and ¼ in. magnetic target balls or Wire target
• Larger Color VGA display
• Fast measurement update rate 60Hz
• Programmable Instrument lock with password
• RS-232/USB/VGA output Communication Modes
• Direct Interface to Excel spreadsheet
• WINXL interface program
• Generate on board reports
• Designed with IP67 rating
• Expanded alphanumeric data logger
• Save and recall option for stored calibration file
• Bench style case with improved gage stand
• Low and high reading Alarm
• Ability to export file to MicroSD card in .txt and CSV format
• Strip Chart view
• Inbuilt Calibration Facility
• Selectable measurement units – mm or inch
• Ability to store Thickness readings in one of standard file formats – Incremental, Sequential, Sequential with Custom point, 2-D grid
• Other Probes designs – Straight and Right Angles available on request
• Accessory Kit – Disk Kit, Wire Target Kit, Standard up to 9.1 mm (0.360 inches), Extended range up to 25.4 mm (1 inch)
• Chart View – Strip Chart Type View